HDD Regenerator features
- The tool can be used with FAT, NTFS or any other file system, and also with unformatted or unpartitioned disks.
- Ability to detect physical bad sectors on a hard disk drive surface and repair physical bad sectors (magnetic errors) on a hard disk surface.
- Bootable regenerating flash can be created from the program and used to automatically start regenerating process.
- Bootable regenerating CD allows starting regenerating process under DOS automatically.
- Run the HDD Regenerator. You can start HDD Regenerator direcly under Windows XP or Vista. Other methode You can start HDD Regenerator from console mode by creating bootable CD or Bootable USB flash.
- Click start process under windows from Regeneration menu.
- Choose the drive to Process then click start process
- Choose mode (”Scan and Repair” or “Scan Only”)
- Enter the “Starting Sector” parameter. Leave this parameter equal to 0 if you want to scan the entire disk. Enter the sector value if you want to scan the disk not from the beginning.
- Wait while the scanning is completed.
great dear you have deep knowledge thanks for your help recently i was in Netherlands then i face some data problem then i found a website which provide data recovery service this one help me lot to recover my data and thanks to your for your info keep updating
ReplyDeleteDear,
ReplyDeleteI have already faced same problem when i was in Netherland and tried for solution RSE Data Recovery which is too good oneself.
Yes , I have faced same problem and tried for solution
ReplyDeleteRSE Datenrettung Services which is better option for me on that moment.
Dear,
thanks a lot for this help.
thnx...
ReplyDeleteSome days ago I was also going through same problem .I thought I will loss my whole data and i should start all over again. But thanks to data recovery service which makes possible to recover my whole data.
ReplyDelete